Grupo de Polímeros

Flexible thermoelectric energy harvesting system based on polymer composites

Green Bionanocomposites Based on Polyhydroxybutyrate and Filled with Cellulose Nanocrystals: Melting Processing and Characterization

Impact of oxidation-induced ordering on the electrical and mechanical properties of a polythiophene coprocessed with bistriflimidic acid

Enhancement of 3D printability by FDM and electrical conductivity of PLA/MWCNT filaments using lignin as bio-dispersant

Polyethylene/ poly(3-hydroxybutyrate-co-3-hydroxyvalerate /carbon nanotube composites for eco-friendly electronic applications

Effect of different plasticizers on thermal, crystalline, and permeability properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) films

Last developments in polymers for wearable energy storage devices

Moving to e-Service Learning in Higher Education

Gold(III) Porphyrin Was Used as an Electron Acceptor for Efficient Organic Solar Cells

Donut-Shaped Microparticles Prepared from Different C¿Type Starch Sources: Characterization and Encapsulation of Gallic Acid

Flexible 3D printed acrylic composites based on polyaniline/multiwalled carbon nanotubes for piezoresistive pressure sensors

Semi-paracrystallinity in semi-conducting polymers

Unraveling the Influence of the Preexisting Molecular Order on the Crystallization of Semiconducting Semicrystalline Poly(9,9-di-n-octylfluorenyl-2,7-diyl (PFO)

Isosorbide plasticized corn starch filled with poly (3-hydroxybutyrate-co-3-hydroxyvalerate) microparticles: Properties and behavior under environmental factors

Lignin as a High-Value Bioaditive in 3D-DLP Printable Acrylic Resins and Polyaniline Conductive Composite

Design Rules for Polymer Blends with High Thermoelectric Performance

Comparing the microstructure and photovoltaic performance of 3 perylene imide acceptors with similar energy levels but different packing tendencies

Correlating Acceptor Structure and Blend Nanostructure with the Photostability of Nonfullerene Organic Solar Cells

Photocurable printed piezocapacitive pressure sensor based on an acrylic resin modified with polyaniline and lignin

Preparation and characterization of bionanocomposite films based on wheat starch and reinforced with cellulose nanocrystals.

Polymorphism in Non-Fullerene Acceptors Based on Indacenodithienothiophene

Printability Study of a Conductive Polyaniline/Acrylic Formulation for 3D Printing

Physical Aging Behavior of a Glassy Polyether

Crystallization-Induced Gelling as a Method to 4D Print Low-Water-Content Non-isocyanate Polyurethane Hydrogels

Influence of the hydrophilicity of montmorillonite on structure and properties of thermoplastic wheat starch/montmorillonite bionanocomposites

Improving molecular alignment and charge percolation in semiconducting polymer films with highly localized electronic states through tailored thermal annealing

Dense Matrix Multiplication Algorithms and Performance Evaluation of HPCC in 81 Nodes IBM Power 8 Architecture

Y6 Organic Thin-Film Transistors with Electron Mobilities of 2.4 cm2 V-1 s-1 via Microstructural Tuning

Influence of Backbone Curvature on the Organic Electrochemical Transistor Performance of Glycolated Donor-Acceptor Conjugated Polymers

Study, measurement and mitigation of radon activity concentration in the School of Computer Science of the Universidade da Coruña in the North West of Spain

Photophysical and structural modulation of poly(3-hexylthiophene) nanoparticles via surfactant-polymer interaction

The Importance of Quantifying the Composition of the Amorphous Intermixed Phase in Organic Solar Cells

A Novel Hydrocolloid Film Based on Pectin, Starch and Gunnera tinctoria and Ugni molinae Plant Extracts for Wound Dressing Applications

Towards a sustainable campus: working together to achieve the green campus flag on the UDC peripheral campus of Ferrol

Photocured conductive PANI/acrylate composites for digital light processing. Influence of HDODA crosslinker in rheological and physicochemical properties

Experimental and Numerical Investigation of the Extrusion and Deposition Process of a Poly(lactic Acid) Strand with Fused Deposition Modeling

Carrageenan-based physically crosslinked injectable hydrogel for woundhealing and tissue repairing applications

Improvement of endothelial function by Gunnera tinctoria extract with antioxidant properties

Properties and behavior under environmental factors of isosorbide-plasticized starch reinforced with microcrystalline cellulose biocomposites

Service-Learning Projects in University Degrees Based on Sustainable Development Goals: Proposals and Results

Overexpression of ZePrx in Nicotiana tabacum Affects Lignin Biosynthesis Without Altering Redox Homeostasis

PHBV/CNC bionanocomposites processed by extrusion: Structural characterization and properties

Hydrocortisone loaded poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) nanoparticles for topical ophthalmic administration: Preparation, characterization and evaluation of ophthalmic toxicity

Effect of the processing-induced morphology on the mechanical properties of biodegradable extruded films based on poly(lactic acid) (PLA) blends

Corn starch plasticized with isosorbide and filled with microcrystalline cellulose: processing and characterization

Equilibrios ácido-base: determinación de la constante de disociación del ácido acético mediante una práctica de laboratorio

Poly(hydroxybutyrate-co-hydroxyvalerate) microparticles embedded in k-carrageenan/locust bean gum hydrogel as a dual drug delivery carrier

Poly (3-hydroxybutyrate-co-3-hydroxyvalerate)/cellulosenanocrystal films: artificial weathering, humidityabsorption, water vapor transmission rate, antimicrobialactivity and biocompatibility

Preparation of donut-shaped starch microparticles by aqueous-alcoholictreatment

Starch films loaded with donut-shaped starch-quercetin microparticles: characterization and release kinetics

Starch edible films loaded with donut-shaped starch microparticles

Susceptibility of two co-existing mytilid species to simulated predation under projected climate change conditions

Thermoelectric properties and intrinsic conduction processes in DBSA and NaSIPA doped polyanilines

Influence of phase morphology on the rheology and thermal conductivity of HDPE/PA6 immiscible blends with alumina whiskers

Effect of Environmental Factors on Poly(3-hydroxybutyrateco-3-hydroxyvalerate) / Poly(butylene adipate-coterephthalate) / Montmorillonite Nanocomposites with antimicrobial agents

Piezoresistive polymer blends for electromechanical sensor applications

Novel Self-Reinforced Films Based on Poly (3-Hydroxybutyrate-Co-3-Hydroxyvalerate) (PHBV) and PHBV Microparticles

Piezoresistive response of extruded polyaniline/(styrene-butadiene-styrene) polymer blends for force and deformation sensors

Preparation and characterization of nano and micro particles of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) via emulsification/solvent evaporation and nanoprecipitation techniques

NovelSelf-ReinforcedFilms Based on Poly (3-Hydroxybutyrate-Co-3-Hydroxyvalerate) (PHBV) and PHBV Microparticles.

Effects of poly (3-hydroxybutyrate-co-3-hydroxyvalerate) microparticles on morphological, mechanical, thermal, and barrier properties in thermoplastic potato starch films

Entrapment of chitosan, pectin or ¿-carrageenan within methacrylate based hydrogels: Effect on swelling and mechanical properties

Multifunctional electromechanical and thermoelectric polyaniline-poly(vinyl acetate) latex composites for wearable devices

Preparation of starch nanoparticles loaded with quercetin usingnanoprecipitation technique

Study of the structural order of native starch granules using combined FTIR and RXD analysis

Role of rheology in tunning thermalconductivity of polyamide 12/polyamide 6composites with a segregated multiwalledcarbon nanotube network

Segregated Conductive Network of MWCNT in PA12/PA6 Composites: Electrical and Rheological Behaviour

Role of rheology in tunning thermal conductivity of polyamide 12/polyamide 6 composites with a segregated multiwalled carbon nanotube network

Dielectric relaxation of near-percolated carbon nanofiber polypropylene composites

Effect of nanocellulose as a filler on biodegradable thermoplastic starch films from tuber, cereal and legume

Cyclic temperature dependence of electrical conductivity in polyanilines as a function of the dopant and synthesis method

Morphology, thermal and barrier properties of biodegradable films of poly (3-hydroxybutyrate-co-3-hydroxyvalerate) containing cellulose nanocrystals

Morphological and structural changes of starch during processing by melt blending

Water-compatible imprinted pills for sensitive determination of cannabinoids in urine and oral fluid

Chemical composition and thermal properties of Chilean Araucaria araucanastarch

Synthesis and characterization of polyhydroxybutyrate-co-hydroxyvalerate nanoparticles for encapsulation of quercetin

Water sorption of PA12/PA6/MWCNT composites with a segregated conductive network: structure-property relationships

Influence of polyamide ratio on the CNT dispersion in polyamide 66/6 blends by dilution of PA66 or PA6-MWCNT masterbatches

Migration kinetics of sorbic acid from polylactic acid and seaweed based films into food simulants

La resolución de problemas como actividad en la docencia de la Química de los grados en Ingeniería Eléctrica y en Ingeniería Electrónica Industrial y Automática (Universidad de A Coruña, España) en el marco del Espacio Europeo de Educación Superior (EEES)

Processing and characterization of polyols plasticized-starch reinforced with microcrystalline cellulose

Polylactic acid and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) nano and microparticles for packaging bioplastic composites

MALDI-TOF to compare polysaccharide profiles from commercial health supplements of different mushroom species

Improving the electrical properties of polyamide nanocomposites

Selective removal of ATP degradation products from food matrices I: Design and characterization of a dummy molecularly imprinted specific sorbent for hypoxanthine

Volatile phenols depletion in red wine using molecular imprinted polymers

Enhanced thermal conductivity of rheologically percolated carbon nanofiber reinforced polypropylene composites

Accelerated Ageing of Styrene-Butadiene Rubber Nanocomposites Stabilized by Phenolic Antioxidant

Molecularly imprinted polymer for selective determination of ¿9-tetrahydrocannabinol and 11-nor-¿9-tetrahydrocannabinol carboxylic acid using LC-MS/MS in urine and oral fluid

Influence of the molecular weight of a modifier on the phase separation in an epoxy thermoset modified with a thermoplastic

Assessing changes on poly(ethylene terephthalate) properties after recycling: Mechanical recycling in laboratory versus postconsumer recycled material

Morphology and Thermal Behavior of Poly (3-hydroxybutyrate-co-3-hydroxyvalerate)/Poly(butylene adipate-co-terephathalate)/Clay Nanocomposites

Flame retardancy and thermal stability of organic-inorganic hybrid resins based on polyhedral oligomeric silsesquioxanes and montmorillonite clay

Estudio de la espontaneidad y visualización de reacciones de oxidación-reducción (redox) sencillas en una práctica de laboratorio

Effect of carbon nanotube type and functionalization on the electrical, thermal, mechanical and electromechanical properties of carbon nanotube/styrene-butadiene-styrene composites for large strain sensor applications

Extruded polyaniline/EVA blends: Enhancing electrical conductivity using gallate compatibilizers

Fracture and thermal behaviour of biomass ash polypropylene composites

Horse chestnut (Aesculus hippocastanum L.) starch: Basicphysico-chemical characteristics and use as thermoplastic material

Carbon Nanofiber Type and Content Dependence of the Physical Properties of Carbon Nanofiber Reinforced Polypropylene Composites

Structure-fracture properties relationship for Polypropylene reinforced with fly ash with and without maleic anhydride functionalized isotactic Polypropylene as coupling agent

Alumina Whisker Selection to Design Fiber-Reinforced Polyethylene Composites

Study of thermal and morphological properties of a hybrid system, iPP/POSS. Effect of flame retardance.

Plasticized Poly(lactic acid)-Poly(hydroxybutyrate) (PLA-PHB) Blends Incorporated with Catechin Intended for Active Food-Packaging Applications

Analytical determination of flavonoids aimed to analysis of natural samples and active packaging applications

From Spherical Micelles to Hexagonally Packed Cylinders: The Cure Cycle Determines Nanostructures Generated in Block Copolymer/Epoxy Blends

Enhancing the Release of the Antioxidant Tocopherol from Polypropylene Films by Incorporating the Natural Plasticizers Lecithin, Olive Oil, or Sunflower Oil

Interaction and Release of Catechin from Anhydride Maleic-Grafted Polypropylene Films

Immobilization of green tea extract on polypropylene films to control the antioxidant activity in food packaging

Development of antioxidant active films containing tocopherols to extend the shelf life of fish

Toughening Strategies of Carbon Nanotube / Polycarbonate Composites with Electromagnetic Interference Shielding Properties

Co-existence of two mytilid species in a heterogeneous environment: mortality, growth and strength of shell and byssus attachment

Improving the capacity of polypropylene to be used in antioxidant active films: incorporation of plasticizer and natural antioxidants

Epoxy/Anhydride Networks Modified With Polyhedral Oligomeric Silsesquioxanes

A study of competitive molecular interaction effects on imprinting of molecularly imprinted polymers

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/Clay Nanocomposites for Replacement of Mineral Oil Based Materials

Insight into BPA-4-vinylpyridine interactions in molecularly imprinted polymers using complementary spectroscopy techniques

Enhancing polyamide properties with alumina whiskers

Effects of silane functionalization of alumina whiskers on high-density polyethylene composites

Insight into industrial PLA aging process by complementary use of rheology, HPLC and MALDI

Polycarbonate nanocomposites for electromagnetic shielding

Piezoresistive response of carbon nanotubes-polyamides composites processed by extrusion

Rheological and Electrical Analysis in Carbon Nanofiber Reinforced Polypropylene Composites

Effect of PPG-PEG-PPG on the tocopherol controlled release from films intended for food packaging applications

Commercial biodegradable material for food contact: methodology for assessment of service life

Tensile and fracture behaviour of PP/wood flour composites

Rheology and thermal behavior of polyamide reinforced wiht alumina whiskers

Preparation, evaluation and characterization of quercetin-molecularly imprinted polymer for preconcentration and clean-up of catechins

Processing and characterization of starch-based materials from pehuen seeds (Araucaria araucana (Mol) K. Koch)

Exfoliated/intercalated silicate/hot styrene butadiene rubber nanocomposites: structure -properties relationship

Determination of polyolefin additives by reversed-phase liquid chromatography

Phase separation and morphology development in a thermoplastic-modified toughened epoxy

Rheology and thermal behaviour of polyamide reinforced with alumina whiskers

Physical, chemical and mechanical properties of pehuen cellulosic husk and its pehuen-starch based composites

An approach to assess the synergistic effect of natural antioxidants on the performance of the polypropylene stabilizing systems

Nanoclay-Reinforced Poly(butylene adipate-coterephthalate)Biocomposites for Packaging Applications

Thermodynamic analysis of phase separation of a thermoplastic in a variant epoxy/monoamine-diamine system: influence of epoxy molecular structure

Microstructure, Morphology, and Mechanical Properties of Styrene-Butadiene Rubber/Organoclay Nanocomposites

Natural Extracts as Potential Source of Antioxidants to Stabilize Polyolefins

Thermodynamic analysis of polymerization-induced phase separation of a polystyrene in epoxy/monoamine-diamine systems. Effect of monoamine-diamine proportion on the phase diagram

Effect of particle size and a processing aid on the crystallization and melting behavior of iPP/red pine wood flour composites

Synthesis and characterization of bisphenol-A imprinted polymer as a selective recognition receptor

Development, validation and application of Micellar Electrokinetic Capillary Chromatography method for routine analysis of catechins, quercetin and thymol in natural samples

Effect of Several Variables in the Polymer Toys Additive Migration to Saliva

Thermal behavior of blends based on a thermoplastic-modified epoxy resin with a crosslinking density variation

Simulation of molecular fractionation and species distributions in phase separation of polystyrene-modified epoxy/monoamine-diamine blends

Impact of functional cross-linker on recognition properties of a Bisphenol-A imprinted polymer film for coating a Quartz Crystal Microbalance

Efficacy of Hindered Amines in Woodflour-Polypropylene Composites Compatibilized with Vinyltrimethoxysilane After Accelerated Weathering and Moisture Absorption

An Approach to Imprint Irganox 1076: Potential Application to the Specific Migration Test in Olive Oil

Epoxy resin modified with a thermoplastic. Influence of modifier and reaction temperature on the phase separation

Effect of an epoxy-octasilsesquioxane on the thermodegradation of an epoxy/amine system

Rheological, thermal and mechanical characterization of fly ash-thermoplastic composites with different coupling agents

Application of Liquid Chromatography in Polymer Non-Ionic Antistatic Additives Analysis

Liquid chromatographic methods to analyze hindered amines light stabilizers levels to improve the safety in polyolefins

Oil degradation monitoring with chemical sensors and molecular imprinted polymer

Study of the crosslink density, dynamo-mechanical behaviour and microstructure of hot and cold SBR vulcanizates

Liquid chromatography method to determine polyamines in thermosetting polymers

Monitorización de la degradación de aceites con sensores químicos y polímeros de impronta molecular

An Approach to Imprint Irganox 1076: Potential Application to the Specific Migration Test in Olive Oil

Effect of organoclay reinforcement on the curing characteristics and technological properties of SBR sulphur vulcanizates

Impact Fracture Behavior and Damage Mechanisms of PP/EVOH Blends Compatibilized with Ionomer Zn2+

Rheological, mechanical and thermal behaviour of wood polymer composites (WPC) based on recycled polypropylene

Natural Extracts as Potential Source of Antioxidants to Stabilize Polyolefins

Effect of aminomethoxy silane and olefin block copolymer on rheomechanical and morphological behavior of fly ash filled polypropylene composites

Polymer blends based on an epoxy-amine thermoset and a thermoplastic: Effect of thermoplastic on cure reaction and thermal stability of the system

Rheomechanical and morphological study of compatibilized PP/EVOH blends

Application of FT-IR spectroscopy to determine transport properties and water-polymer interactions in polypropylene (PP)/ethylene alcohol vinyl (EVOH) films: effect of ethylene alcohol vinyl content a

Influencia de la compatibilización sobre la actividad nucleante en mezclas de polipropileno y copolímero de etileno-alcohol vinílico

Aspectos cinéticos de la cristalización isoterma del polipropileno isotáctico en sus mezclas con un copolímero de etileno-alcohol vinílico

Barrier and physical properties of Polypropylene/High-Barrier Ethylene-Vinyl Alcohol Copolymer Blends compatibilized with a sodium ionomer

Effects of vinyltrimethoxy silane on mechanical properties and morphology of polypropylene-woodflour composites

Design of new polypropylene wood flour composites: processing and physical characterization

Deformation and fracture behavior of PP/ash composites

Phase diagram of different epoxy-amine precursors modified with a thermoplastic. Effect of structure of epoxy-amine system on miscibility

Effects of vinyltrimethoxy silane on thermal properties and dynamic mechanical properties of polypropylene-woodflour composites

High-Performance Chromatography Analysis of ten Dyes for Control of Safety of Commercial Articles

Experimental designs in the optimization of a microwave acid digestion procedure for the determination of metals in paper and board samples by atomic absorption spectrometry

Morphology of Different Epoxy-Amine Systems Modified with a Thermoplastic. Influence of Temperature, Thermoplastic Concentration and Molecular Structure of Epoxy Systems

Analysis of the isothermal crystallization of polypropylene/wood flour composites

Mechanism of Thermal Degradation of an Inorganic-Organic Hybrid Based in an Epoxy-POSS

Thermodynamic analysis of phase separation of a thermoplastic in the precursors of different epoxy-amine systems.

Epoxy/POSS organic-inorganic hybrids. ATR-FTIR and DSC studies

Study of an epoxy system cured with different diamines by differential scanning calorimetry

Antioxidants Content and Migration from Commercial Polyethylene, Polypropylene and Polyvinyl Chloride Packagings

Organic/inorganic hybrid materials from an epoxy resin cured by an amine silsesquioxane

Development of an UPLC Method to Improve Additives Determination in Polymeric Materials

Effect of Temperature and Type of Food Simulant on Antioxidant Stability

Mechanical and fracture behavior of Polypropylene/Poly(ethylene-co-vinyl alcohol) blends compatibilized with ionomer Na+.

FTIR Study on the Nature of Water Sorbed in Polypropylene (PP)/Ethylene Alcohol Vinyl (EVOH) Films

Phase diagram for a system of polydisperse components constituted by the precursor of an epoxy/diamine thermoset and a thermoplastic. Analysis based on a lattice theory model

Dynamic crystallization of polypropylene and wood-based composites

Thermodynamic analysis of phase separation in an epoxy/polystyrene mixture

Deformation and fracture behavior of polypropylene-ethylene vinyl alcohol blends compatibilized with ionomer Zn2+.

Influence of the ethylene-methacrylic acid-Zn2+ ionomer on the thermal and mechanical properties of blends of poly(propylene) (PP)/ethylene-vinyl alcohol copolymer (EVOH)

Thermodegradation kinetics of a hybrid inorganic-organic epoxy system

Multivariate analysis of the grande river waters (NW SPAIN)

Influence of the stretching in the crystallinity of Biaxially Oriented Polypropylene (BOPP) Films

Study of an octaepoxysilsesquioxane cured with a diamine

Determination of antioxidants by solid-phase extraction method in aqueous food simulants

Use of a sodium ionomer as compatibilizer in polypropylene/high-barrier ethylene-vinyl alcohol copolymer blends: Processability of the blends and their physical properties

A study of the effect of ABS on the mechanical properties of an epoxy system.

Study of the effect of Poly (acrylonitrile-co-butadiene-co-styrene) on the mechanical properties of an epoxy system.

Extraction and quantification of. Antioxidants from low-density Polyethylene by microwave energy and liquid chromatography

Effects of a mixture of stabilizers on the structure and mechanical properties of polyethylene during reprocessing

Selection of a precursor of a monofunctional polyhedral oligomeric silsesquioxane reacted with aromatic diamines

Thermal behaviour of a polyhedral oligomeric silsesquioxane with epoxy resins cured by diamines.

Determinación de aniones mediante electroforesis capilar. Estado actual del tema

Epoxy Networks Containing Large Mass Fractions of a Monofunctional Polyhedral Oligomeric Silsesquioxane (POSS).

Determination Of Antioxidant Migration Levels From Low-Density Polyethylene Films Into Food Simulants

Determination of chloriatriazines, methylthiotriazines and one methoxytriazine by SPE-LC-UV in water samples

Characterization of biaxially oriented polypropylene films by atomic force microscopy and micro thermal analysis

Isothermal curing by dynamic mechanical analysis of three epoxy resin systems: gelation and vitrification

Charectización of biaxially oriented polypropylene films by atomic force microscopy and microthermal analysis.

Determinación of Triazines in water samples by high-performance liquid chromatography with diode-array detection

Captación de Cd, Cr, Ni, Zn y Cu por Chlorella vulgaris en aguas residuales

Aplicación de los agentes complejantes AMEDT y ADTP a la determinación simultánea de cobre y cobalto por espectrofotometría derivada

Study of the physical aging of an epoxy/cycloaliphatic amine resing modified with ABS

Blends of ABS with an epoxy/cycloaliphatic amine resin: phase separation behavior and morphologies

Dinamic mechanical analysis of an epoxy/thermoplastic blend: polymerización induced phase separation

Characterization of an ABS-modified epoxy system

Analysis of Blends of Poly (styrene-co-acrylonitrile) with and Epoxy/Aromatic Amine Resin Using Scanning Thermal Microscopy

Effect of poly(styrene-co-acrylonitrile) on the curing of an epoxy/amine resin

Effect of water sorption on the structure and the mechanical properties of an epoxy resin system.

Enthalpy relaxation in a epoxy cycloaliphatic amine resin

Thermal descomposition behavior and the mechanical properties of an epoxy/cycloaliphatic amine resin with ABS

Migration of lead and cadmium from ceramic materials used in food preparation

Aplicación del Análisis Dinamomecánico al Estudio de una Mezcla Epoxi-Termoplástico.

Blends of an epoxy/ cycloaliphatic amine resin with poly( ether-imide)

Decomposition behavior of epoxy-resin systems cured by diamines

Physical aging of a tetrafunctional/ phenol novolac epoxy mixture cured with a diamine. DSC and DMA measurements

Spectrophotometric Methods for the Simultaneous Determination of Metals in University Laboratories

Study of the parameters affecting the binding of metals in solution by Chlorella vulgaris

La importancia de la educación ambiental en la didáctica de la Química

Propiedades Mecánicas de un sistema epoximodificado con ABS

Thermal properties of amine cured diglycidyl ether of bisphenol A epoxy blended with poly( ether imide)

Modificación de propiedades mecánicas de un material epoxi por adición de termoplástico

Mechanical behavior of tetrafunctional/phenol novolac epoxy mixtures cured with a diamine

Determinación espectrofotométrica de iones metálicos con algunos derivados nitrogenados de quelones

Cure kinetics of amine-cured diglycidyl ether of bisphenol a epoxy blended with poly (ether imide)

Kinetic studies of the effect of ABS on the curing of an epoxy/cycloaliphatic amine resine

Binding of Metals in Solution by Chlorella Vulgaris

Determinación de Cu y Zn en cerveza por espectrofotometría de absorción atómica

Thermal degradation of tetrafunctional/phenol novolac epoxy mixture cured with a diamine

Concentraciones de Metales Pesados en Venepuris Pullastra de la Ría de Ferrol ( NW España)

Degradation Kinetics of an epoxy/cycloaliphatic amine resin under isothermal and nonisothermal conditions

Cure Kinetics of amine cured tetrafunctional epoxy blends with poly (styrene-co-acrylonitrile).

Physical Aging of an Epoxy/Cycloaliphatic Amine Resin.

Simultaneous determination of bismuth (III) and cobalt (II) with methylethylenediaminetetracetic acid by using zero-crossing method applied to derivative spectrophotometry

Determinación espectrofotométrica de Hierro (III) con ácido metilEtilendiaminotetracético (AMEDT) como agente complejante. Diversos métodos.

Blends of an epoxy/cycloaliphatic amine resin with poly(ether imide).

Water sorption in tetrafunctional/phenol novolac epoxy mixtures cured with a diamine

Thermogravimetric study of tetrafunctional/ phenol novolac epoxy mixture cured with diamine

Simultaneous determination of palladium (II) and cobalt (II) by using derivative spectrophotometry with DTPA.

Variación de las propiedades mecánicas con la degradación térmica en un sistema de epoxi de alta temperatura

Determination of metal ions in algal solutions samples by capillary electrophoresis

Caracterización mecánica de un sistema epoxi de altas prestaciones

Simultaneous determination of copper (II) and mercury (II) by using a zero-crossing method.

Simultaneous determination of nickel and bismuth with diethylentriaminepentaacetic acid (DTPA) by derivative spectrophotometry

Dynamic mechanical behavior of an epoxy system with thermal degradation

Análisis por calorimetría diferencial de barrido de un sistema epoxi termoestable basado en la resina TGDDM

Thermogravimetric study of an epoxy system based on a tetrafunctional resin

Effect of thermal degradation on the mechanical properties of a diglycidyl ether of bisphenol A/1,3 - bisaminomethylcyclohexane (DGEBA/ 1,3-bac) epoxy resin

Isothermal cure of an epoxy system containing tetraglycidyl-4,4'- diaminodiphenylmethane (TGDDM) and a multifunctional novolac glycidyl ether cured with 4,4'- diaminodiphenylsulfone (DDS). Vitrification and gelation

Simultaneous determination of chromium(III) and copper(II) by using derivative spectrophotometry with MEDTA

Dynamic mechanical study of the water absorption of an epoxy system

Absorción de agua de un sistema epoxi tetrafuncional/fenol novolaca curado con DDS

Cure kinetics of an epoxy systems containing tetraglycidy1 4,4¿diaminodiphenylmetane (TGDDM) and a multifunctional novolac glycidyl ether cured with 4,4¿ - diaminodiphenylsulfone (DDS)

Application of derivative spectrophotometry to simultaneous determination of nickel and mercury with diethylenetriaminepentaacetic (DTPA)

Application of derivative spectrophotometry to simultaneous determination of lead and nickel with MEDTA