Materials and renewable energy for engineering, environment and sustainability (MARES)

CFD model of the heat transfer processes in an offshore photovoltaic panel

Fomentar a igualdade

Optimising energy efficiency enhancing NILM through high-resolution data analytics

Comprehensive comparative study on n-caproate production by Clostridium kluyveri: batch vs. continuous operation modes

Carbon dioxide as key player in chain elongation and growth of Clostridium kluyveri: Insights from batch and bioreactor studies

Land and sea transport options for the installation of green artificial reefs (GARs) in shallow waters: a Galician case study

Unlocking the potential of one-carbon gases (CO2, CO) for concomitant bioproduction of ß-carotene and lipids

Floating wave energy farms: How energy calculations shape economic feasibility?

Effect of electron acceptors on product selectivity and carbon flux in carbon chain elongation with Megasphaera hexanoica

Economic viability of floating wave power farms considering the energy generated in the near future

Competitiveness Factors of a Shipyard in the Era of New Uses of Oceans

Resilence and adaptation: Galician canning fish industry evolution

Assessment of Engineering Undergraduates Active Learning Experience using Computer Simulations

Technical and economic challenges for floating offshore wind deployment in Italy and in the Mediterranean Sea

Urban mobility trends and climate change: sustainability policies in the parking industry

The augmented and integrative model of economic growth: Theoretical and empirical evidence from USA

Sustainability , investment strategy, and governance : evaluation of wind energy sector in North-West Spain

STEMbach Experiences at Higher Education

State-of-the-art in the accumulation of lipids and other bioproducts from sustainable sources by Yarrowia lipolytica

Reconversion of the shipbuilding sector: from production by project to mass production. What is its effect on the LCOE of a wave energy farm?

Production of biofuels from C1 -gases with Clostridium and related bacteria-Recent advances.

Effect of pH and medium composition on chain elongation with Megasphaera hexanoica producing C4-C8 fatty acids

Characterisation of Electrical Power Systems Based on Electrical Curves and their properties

Application of residuals from purification of bivalve molluscs in Galician to facilitate marine ecosystem resiliency through artificial reefs with shells ¿ One generation

Factors affecting the optimisation and scale-up of lipid accumulation in oleaginous yeasts for sustainable biofuels production

Sensitivity study of the economics of a floating offshore wind farm. The case study of the SATH® concrete platform in the Atlantic waters of Europe

DSUALMH- A new high-resolution dataset for NILM

Evaluation of Sinusoidal Distribution Networks Using the EPC Simulation Software

Circular economy in territorial planning strategy: Incorporation in cluster activities and economic zones

Robot-assisted laser ablation for 3D surfaces. Application for paint removal with ultrashort pulse laser

A tool to select offshore renewable energy facilities.The case of study of shipyards and ports in Spain

Considerations on the programmed functional life (one generation) of a green artificial reef in terms of the sustainability of the modified ecosystem

Multilevel governance, PV solar energy, and entrepreneurship: the generation of green hydrogen as a fuel of renewable origin

Environmental strategy and the petroleum industry: a sustainability balanced scorecard approach

Importance of the fluctuations of the steel price in the economic feasibility of a hybrid offshore platform in the West of the Iberian Peninsula

Small companies facing the mobility policy in Spain: Is it profitable to remain in the market?

DEFINITION OF AN ARTIFICIAL REEF UNIT THROUGH HYDRODYNAMIC AND STRUCTURAL (CFD AND FEM) MODELS , APPLICATION TO THE ARES-BETANZOS ESTUARY

The Technical and Economic Feasibility of the CENTEC Floating Offshore Wind Platform

Forest Management Communities¿ Participation in Bioenergy Production Initiatives: A Case Study for Galicia (Spain

Opening or not opening educational centers in time of SARS-CoV-2? Analysis of the situation in Galicia (Spain)

A case study of agri-food systems in rural Spain: Impacts, responses and institutional lessons

Implementación de tecnología NFC en el canal HORECA: sostenibilidad, fidelización y definición del perfil del usuario

Efficient production of n-caproate from syngas by a co-culture of Clostridium aceticum and Clostridium kluyveri

Analysis of the economic feasibility of different floating offshore renewable energies in Canary Islands

From Fossil Energy to Renewable Energy: Why is Circular Economy Needed in the Energy Transition?

Femtosecond pulsed laser ablation for paint removal at oblique illumination: Effect of the incidence angle

Digitalización para las pequeñas y medianas empresas: estudio de viabilidad de una app dirigida a la fidelización de los clientes

Study of the Rotary Bending Fatigue Resistance of 30MnB5, 41CrS4 and 30MnVS6 Steels

Evaluation of Hardness, Sliding Wear and Strength of a Hypoeutectic White Iron with 25%Cr after Heat Treatments

STUDY OF THE SUITABILITY OF VARIOUS TYPES OF CASTING MATERIALS FOR THE MANUFACTURE OF A SHIP ENGINE

Erosive Degradation Study of Concrete Augmented by Mussel Shells for Marine Construction

Valuation of a company producing and trading seaweed for human

Economic Feasibility of Floating Offshore Wind Farms Considering Near Future Wind Resources: Case Study of Iberian Coast and Bay of Biscay

The decarbonisation of galicia using renewable marine energy

Improvement of Impact Toughness and Abrasion Resistance of a 3C-25Cr-0.5Mo Alloy Using a Design of Experiment Statistical Technique: Microstructural Correlations after Heat Treatments

How important are ports for the offshore wind industry?: The case of Spain

VALORACIÓN FINANCIERA DE UNA EMPRESA DE MOVILIDAD URBANA SOSTENIBLE EN ESPAÑA

GREENHOUSE GAS EMISSIONS AND ENERGY CONSUMPTION OF COASTAL ECOSYSTEM ENHANCEMENT PROGRAMME THROUGH SUSTAINABLE ARTIFICIAL REEFS IN GALICIA

Fatigue study of the pre-corroded 6082-T6 aluminium alloy in saline atmosphere

A new methodology for decision-making in buildings energy optimization

Preparación de un polarímetro con materiales sencillos

Economic feasibility of floating offshore wind farms in the north of Spain

Analysis of the real energy consumption of energy saving lamps

Managing the oceans: site selection of a floating offshore wind farm based on GIS spatial analysis

Framework for development of an economic analysis tool for floating concrete offshore wind platforms

Economic feasibility of floating offshore wind farms in Portugal

An economic analysis of an innovative floating offshore wind platform built with concrete: the SATH platform

A floating offshore renewable energy economic software

Analysis of contracts to build energy infrastructures to optimize the OPEX

Numerical analysis of NOx reduction using ammonia injection and comparison with water injection

The economic feasibility of floating offshore wave energy farms in the North of Spain

Assessment of the materials employed in green artificial reefs for the Galician estuaries in terms of circular economy

Optimization of a multiple injection system in a marine diesel engine through a multiple-criteria decision-making approach

Selection of an appropriate pre-injection pattern in a marine diesel engine through a multiple-criteria decission making approach

The importance of the activity costs in a shipyard: a case study for floating offshore wind platforms

The Wear Responses of the Welded Joints of ASTM A335 Gr. P11 Steels Affected by Accelerated Flow Corrosion

Estudio comparativo de la nitrocarburación de los aceros AISI 4340 y AISI 347 mediante el proceso Tenifer-QPQ®

Economic aspects of a concrete floating offshore wind platform in the Atlantic Arc of Europe

A Software for Calculating the Economic Aspects of Floating Offshore Renewable Energies

Economic Aspects of a Concrete Floating O shore Wind Platform in the Atlantic Arc of Europe

Study of the Sustainability of Electrical Power Systems: Analysis of the Causes that Generate Reactive Power

Importance of the changes in the teaching methodology with regard to the results obtained by the student

Integration of maintainability and operativity criteria in the contracts to build under EPC model in energy infrastructures to optimize the OPEX. Example of the methodology to analyse the preferences in the owner and contractor point of view

Adaptation of the university studies to the neu european education framework: analsis of the evolution in engineering degrees

Effects of the Expanded Panama Canal on Vessel Size and Seaborne Transport

Oceanographic research vessels: defining scientific winches for fisheries science biological sampling manoeuvres

Planning of the installation of offshore renewable energies: a GIS approach of the Portuguese roadmap

Influence of Size on the Economic Feasibility of Floating Offshore Wind Farms

Methodology to calculate the installation costs of offshore wind farms located in deep waters

Economic feasibility of wave energy farms in Portugal

Importance of the changes in the teaching methodology with regard to the results obtained bay the students

Economic feasibility of an offshore wind farm using spar platforms in the region of Asturias (North of Spain)

Microstructural Analysis and Tribology Behavior of a Medium-Mn Steel with Mo

Effect of multiple injection strategies on emissions and performance in the Wärtsilä 6L 46 marine engine. A numerical approach

Economic comparison of technological alternatives to harness offshore wind and wave energies

Correlation between the Meyer¿s lay parameters and the wear resistance of chromium White cast irons

Economic feasibility of a wave energy farm using GIS

A review of the drive options of offshore anchor handling winches

Methodology to Calculate the Costs of a Floating Offshore Renewable Energy Farm

Costs and feasibility of repowering wind farms

Economic feasibility of floating offshore wind farms

Cost assessment methodology for combined wind and wave floating offshore renewable energy systems

THE EFFECTIVENESS OF THE SPANISH BANKING REFORM APPLICATION OF ALTMAN¿S Z-SCORE

Decision variables for floating offshore wind farms based on life-cycle cost: the case study of Galicia (North-West of Spain)

Economic Viability of a Plant of PV Auto-consumption in EU. Price of kWh Generated

Effect of carbonitriding in a salt bath by a QPQ scheme on stainless steel 321 microstructure and service properties

Evaluación del nivel de legibilidad de contratos EPC redactados en español e inglés para obras industriales

A prociclicidade do sistema bancario en españa. Estudo descritivo do comportamento do negocio bancario perante o cambio de ciclo (2015)

FACTORES DETERMINANTES DA RENTABILIDADE DOS ACCIONISTAS EN PLANTAS FOTOVOLTAICAS EN GALICIA

Financial crises and banking crises: a review of literature and an approach to control elements for the future

OPERATING CASH FLOW AND EARNINGS UNDER IFRS/GAAP: EVIDENCE FROM AUSTRALIA, FRANCE & UK

Definition of optimal fleets for Sea Motorways: the case of France and Spain on the Atlantic cost

Influence of Si and heat treatment on the Meyer¿s index of chromium white cast irons

Cost comparison of three floating offshore wind platforms

Building up a model of cash-flow determination for a wind power project

The Levelized Cost Of Energy (LCOE) of wave energy using GIS based analysis: the case study of Portugal

Sensitivity analysis of floating offshore wind farms

Influence of silicon on wear behavior of silal cast irons

Perspectivas de futuro de los parques eólicos marinos flotantes

Metodología para la evaluación económica de parques eólicos offshore flotantes

Energía eólica marina. ¿Una opción de futuro?

Life-cycle cost analysis of floating offshore wind farms

¿Por qué energía eólica marina flotante?

Mooring for floating offshore renewable energy platforms classification

Positive consequences of the implementation of ISO 14001 in a Galician companies (Spain)

Análise e diagnóstico da responsabilidad social empresarial (RSE) dunha asociación de empresarios galega

A COMPARATIVE STUDY OF THE RESULTS OBTAINED THROUGH DIFFERENT TYPES OF WEAR TESTS

Methodology to calculate mooring and anchoring costs of floating offshore wind devices

Parameters independent on the type of floating offshore wind platform

Design parameters independent on the type of platform in floating offshore wind farms

General economic analysis about the wind farms repowering in Spain

Energía eólica marina. ¿Una opción de futuro?

INFLUENCIA DEL CONTENIDO DE SILICIO Y EL TRATAMIENTO TERMICO EN LA RESISTENCIA AL DESGASTE DE FUNDICIONES BLANCAS AL CROMO EN CONDICIONES DE RAPIDA SOLIDIFICACION

CARACTERIZACION DEL COMPORTAMIENTO TERMOMECANICO DE LAS ALEACIONES SOLDADAS 6082-T6

Comparison of olive, corn, soybean and sunflower oils by PDSC

It is economically possible repowering wind farms. A general analysis in Spain

A photovoltaic power unit providing ancillary services for smart distribution networks

Estimating the reversing and non-reversing heat flow from standard DSC curves in the glass transition region

TRIBOLOGICAL BEHAVIOUR OF HASTELLOY C AND REFRACTALLOY 26

Factores influyentes en la estabilidad a la oxidación del biodiesel. Estudio estadístico

Correlación entre los resultados obtenidos mediante diversas técnicas de ensayo de desgaste

A study on wear of welded joins for pipelines

Comportamiento frente al desgaste abrasivo de las fundiciones tipo silal con grafito esferoidal

Oxidation Stability of Soy and Palm Based Biodiesels Evaluated by Pressure Differential Scanning Calorimetry

Comportamiento al desgaste de fundiciones tipo "silal"

Estudio tribológico de aceros austeníticos tipo Hadfield: influencia del manganeso en su respuesta frente al desgaste

Comportamiento frente al desgaste por abrasión de cuatro tipos de fundiciones

Study of the degradation of a polyesther-polyurethane by TGA and the logistic nixture model

Capas de aleaciones de CoCrMoSi resistentes a la corrosión obtenidas mediante plaqueado por láser

Characteristics of triballoy T-800 and T-900 coatings on steel substrates by laser cladding

Estudio del desgaste de uniones soldadas en tuberías

Estudio del comportamiento frente al desgaste abrasivo de hilos de catenaria de ferrocarril

Influencia de la rugosidad en el comportamiento al desgaste abrasivo

Capas de aleaciones CoCrMoSi resistentes a la corrosión obtenidas mediante plaqueado por láser

Tribological behaviour of an A355 steel pipe welding

Characteristics of tribaloy T-800 and T-900 coatings on steel substrates by laser cladding

Influencia de los tratamientos térmicos en el comportamiento frente al desgaste por abrasión de una fundición de grafito esferoidal obtenida mediante adición de boro

Nanofiller effect on the glass transition of a pyurethane

Evaluating the logistic mixture model on real and simulated TG curves

Evaluating the logistic mixture model on real and simulated TG curves

New method for material classification from TGA data by nonparametric regression

Study of the cure of diglycidyl-ether of bisphenol-a (DGEBA)/triethylenetetramine (TETA) epoxy system by non-isothermal differential scanning calorimetry (DSC).

New method for material classification from TGA data by nonparametric regression.

Logistic mixture model vs Arrhenius for kinetic study of material degradation by dynamic thermogravimetric analysis

Logistic mixture model vs Arrhenius for kinetic study of degradation of materials by dynamic thermogravimetric analysis.

Study of the Cure of a Diglycidyl-Ether of Bisphenol-a (DGEBA) / Triethylenetetramine (TETA) Epoxy System by Non-Isothermal Differential Scanning Calorimetry (DSC)

Influencia del carbono y el cromo en el comportamiento tribológico de aleaciones férreas

Comparing the tribological bahaviour of an austenitic steel subjected to diverse thermal treatments

Separation of overlapping processes from TGA data an verification by EGA

Comparing the tribological behaviour of an austenitic steel subjected to diverse thermal treatments

Subtracting the water effect from DSC curves by using simultaneous TGA data

Separation of Overlapping Processes form TGA DAta and Verification by EGA

Aplicación del diseño de experimentos para ensayos de dureza de un acero austenítico al manganeso

Correlación entre los tratamientos isotérmicos y el comportamiento magnético de los aceros al carbono

Logistic approach to polymer degradation in dymanic TGA

La fiabilidad en el control de calidad de embarcaciones deportivas

Suavizado automático de curvas procedentes de análisis térmico con errores autocorrelacionados

Comportamiento mecanodinámico de una aleación con memoria de forma

Study of a curing reaction of an epoxy resin

Behavioural study of a manganeso steel subjected to abrasión wear and the influence of termal treatment

Microstructural changes in a Ni-Based Super-Alloy induced by Thermal Treatment

Injection molding process of a nylon part

Comparative study by thermal analysis of four diferent kinds of wood

DMTA Study of a nickel-titanium wire

Simultaneous thermal analysis of hexahydrophtalic anhydride.

Characterización by STA of the morters from two ancient buildings in Mondoñedo (Spain).

Thermal Characterización of a Ni-Based superalloy

Diseño de experimentos y superficies de respuesta. Aplicaciones a un problema químico.

Estudio de una resina epoxídica mediante análisis térmico diferencial (STA).

Estudio de la capacidad calorífica de una superaleación de base níquel

Caracterización térmica de un mortero románico

Alometría y construcción naval

Caracterización de maderas mediante análisis térmico

Estudio mecánico de una rueda de material termoplástico

Caracterización y lixiviación de polvos de acería con ácido acético y agentes amoniacales

The influence of metallic ions on the activity of Sulfolobus BC

The bioleaching of different Sulfide Concentrates Using Thermophilic Bacteria.

Inluence of Metallic Icons Pneumatically Stirred Reactors and Massive Samples.

Coal desulphurization. A review

The use of catalytic ions in bioleachig

Desulfuración de carbones. La biodesulfuración como alternativa

BACTERIAL LEACHING OF COPPER AND ZINC FROM A SPANISH COMPLEX SULPHIDE CONCENTRATE

The influence of various ions in the bioleaching of metal sulphides

Kinetics and Mechanism of Ethanolamine Chlorination

Estudio cinético de la oxidación de dietanolamina por iones hipoclorito